Folding Chair Refinish - Easy DIY

I recently refinished a desk to make a Lego table (you can see it here) for my son's room and he needed a chair to go with it.  I didn't want to buy one, so I went down to our basement and found an old folding chair that was not looking very lovely.  It had paint on the seat, but otherwise was in great shape.  The boy wanted some cushion on his chair, so this would be perfect.

I popped the seat cushion off and went right to the spray paint.  I used the same color red that I used on an old school desk that is in my son's room, and I thought I'd have enough to finish this chair.  I ended up running out and had to go get another bottle, so I the first thing I had to pay for was a $3.77 can of paint at Wal-Mart.  I had to put several coats of paint on, which seems to happen any time I use red on anything.  It takes a lot of it to get full coverage.  

After a couple coats...I didn't worry about the seat because it was getting covered with the cushion.

I bought a yard of navy blue fabric at Hobby Lobby, which was more than I needed for this project, but it was $3.99/yard and I also had a 40% off coupon.  I put the fabric over the old cushion cover because I didn't want to damage the foam on the cushion if the old cover had adhesive on it.  This part took about 3 minutes to complete.  I ironed the fabric, laid the cushion on it, and cut around it with about 1.5" of allowance for folding it under.  I didn't worry about cutting perfectly because the bottom wasn't going to show, and clearly they didn't care when they put the original cover on either.  Next I sprayed the cushion with spray adhesive (which I had on hand already), put it on the fabric, and folded it around.  I sprayed the edges on the back side and also put a few staples (pretty sure I could have skipped that step though) around the edges. 

Once the paint was dry, I just popped the cushion back on and I was done.  I can now consider my Lego desk project complete! 

Before/After

 Desk/Chair 

Boring Desk Refinish - Lego Desk Fun!

My son loves Legos.  He has an insane collection of sets, but the problem is that once he builds them, he doesn't have a good way to store them, so they just get dumped in buckets and never rebuilt.  It drives me crazy because the sets are pricey, and I hate that he only builds them one time.  I've been scouring the good old internet for ideas for Lego tables, but he is almost 10, and everything I find seems geared toward much younger kids.  We rearranged his room last week, and I told him we would go find a desk to refinish for his new Lego table.  

We headed out to my beloved local Re-Store last Wednesday with our fingers crossed.  We wandered around, not falling in love with anything.  There were a few pieces that were just okay, but nothing we really loved.  Eventually we stopped and looked at a roll top desk (which was not what we had in mind), and the more we stood there looking at it, the more potential we saw in it.  It was $60, which was more than we had wanted to spend, but we were there on "Spin the Wheel Wednesday", so we knew we could spin and get anywhere from a 5% to a 40% discount.  We put a hold on it, and then went back later in the day with my husband.  At the checkout, my son spun the wheel and was grinning from ear to ear when it landed on 40% off.  $38 including tax and we were on our way!

The desk only took up space in our garage for a few days and then I had to get to work on it.  Below freezing weather was headed our way, and my husband wanted his parking space back. :)

I started by washing the desk with a damp cloth and then repairing a couple small holes.  I removed all the hardware (my son didn't like any of it because, and I quote, "it looks old fashioned, and I want it to be modern") so I wasn't going to reuse it.

Next I made chalk paint (I mix 2 tbsp unsanded grout in 3 tbsp of water, and then stir it into 1 cup of paint...other projects I've done with chalk paint here, here, and here).  I had the quart of paint on hand from a free offer that Glidden had awhile back.  I used it to refinish an old school desk that is aleady in my son's room, and he wanted the big desk to match it.  I painted two coats, let it dry for a day, and then brushed on a coat of polyurethane (which I had on hand already as well)

 for extra protection.  

Paint and Polyurethane I used...

With two coats of paint...

After Polyurethane

I ordered four 10"x10" Lego base plates from Amazon (they were on sale for $3.94 each) and attached them to the desk using Simply Tacky.  I originally planned to glue them, but liked the idea of using the Simply Tacky product because I wanted to be able to easily remove the plates someday.  I knew using craft glue would make that difficult and worried about potential damage to the wood.  I just peeled little bits off, pressed them to the back of the plates, and stuck them to the desk.  It was easy to re-position them and they are stuck on there well enough that won't lift off when he plays.

The next task was to find hardware for the drawers.  It took a trip to four different stores to find what I was looking for... modern, yet appropriate for a boy's room.  I found that things were either very ornate, or silver, or I couldn't get handles and knobs that matched.  Finally found triumph at Home Depot and it only cost me $11.51 for five knobs and four handles.  

As soon as I had the knobs on, my son went right to filling the drawers and setting up his minifigures, so I didn't get a picture before everything was added.  Here is the final, and much loved product.  This was definitely one of my favorite projects that I've done so far.

Kids Chore Chart DIY

I've done chore charts with my kids for a long time, and have tried all different kinds.  We had an online chart that I loved, but it was very easily "out of sight, out of mind" for the kids.   I got tired of having to remind them to check it, so I gave up and went back to having to ask them 1,824,626 times a day if things had been completed.

For the sake of my sanity, I wanted something right where they couldn't miss it each day, and also something that was by itself.  I didn't want it on the refrigerator because we have other stuff on there already.  I also wanted to use magnets which is why I decided to use a baking pan.  We have a small wall between our living room and kitchen and that's where I wanted to put it.

I bought the pan for $4.50 at Big Lots, the box of magnets for $2.99 at Staples, I used scrap booking stickers I had on hand, and I already had primer and spray paint.  I love projects that cost me less than $10...too bad they aren't all like that!

The pan didn't have any holes to hang it from, so I used a drill to make them.  If you have to drill, just make sure your drill bit is one that can go through metal.  After I drilled I sprayed on a coat of primer (meant for metal as well), and then when that was dry I sprayed the color. 

I used a black Sharpie to draw the lines on the pan, and then added the letters.  I used a silver Sharpie to write the permanent tasks on the magnets, and left other magnets blank for tasks to be added as needed.  

Not much too it.  I finished it while my son was at school today, and when we picked him up his little sister said "You have so many chores to do when you get home."  Based on his response, I don't think he liked what she had to say. Hopefully they enjoy being able to move the magnets to the "done" side and keep up with everything without me having to ask.  Hahahahaha!  A girl can dream right?

Fabric Covered Canvas DIY

Before we got our new bed, I had a grand plan for one of the bare walls in our room.  However, when we got the bigger bed, we moved it to that all, thus ruining my plans.  I wasn't sure what I wanted to do with the wall until I found some super fab elephant prints in the BlackBaraoque Etsy shop.  They are printed on antique book pages and are really gorgeous in person.  I have a major thing for elephants, and fell in love with the prints right away.  I originally ordered only one (the elephant w/flowers), because at that point I wasn't sure what to do with it, but felt it needed to be somewhere in my house.  I glanced at the site about a week later, and really, really had to have two others as well.

Once we had a plan for the headboard, I knew that I wanted to put the elephant prints above it.  I loved the elephants with the heart and wanted it to go in the center, but felt that it needed a more dramatic frame to showcase it.  I tend to hang on to things for way too long, and had some old 8x10 silver picture frames (from our old house...that we moved out of 10 years ago) that I could spray paint black.  I had leftover paint from the handles on the dresser refinish I did, so that was easy.  I had fabric leftover from making the pillows for the church pew, so I decided to cover a canvas and then hang the frame on that.  The 11x14 canvas was only $5.99 for a pack of two at Hobby Lobby, making this project pretty cheap.

I wanted quick and easy, and I got it.  I sprayed the frames and set them aside to dry.  For the canvas, I put the fabric face down, sprayed the canvas with spray adhesive, and pressed them together.  Next I flipped it over, sprayed the sides and back edges, and folded the fabric up.  I trimmed the extra fabric off, folded the corners down, and stapled them.  Done and done. 

The only thing left was to hang the canvas, measure where I wanted the other pictures to hang, and hang them all up.  Super easy!  The picture on the top left really isn't hanging crooked...that would send me over the edge.  I just didn't hold my phone straight enough when I took the picture and didn't feel like going back upstairs to redo it.

Headboard DIY

We upgraded to a king size bed a few months ago, but after endless searching, I couldn't find a bed that I liked at all.  After many failed searches, we ended up just buying the mattress/box springs, and a bed frame and I decided that we would just build a headboard that I liked.

I had a pretty good idea of what I wanted to do, but wasn't exactly sure how to make it work, so I did some research and then decided to wing it.

I knew I didn't want wood with knots, or any kind of imperfections, so I went with these primed boards from Lowes.  I got a variety of widths for the main part, and for the side trim pieces.  A king size bed is 76" wide, and the typical king headboard is 78", so I went with that for the total width.  We measured everything and my husband cut them for me.

Next, I painted each board using the same color paint I used in my Dresser Refinish and Church Pew Refinish posts.  I love the Olympic brand paint from Lowes, and use it for pretty much anything I paint.

I wanted one of the boards to be different, and I decided I wanted to cover it with the same fabric I used for the Church Pew.  I got it from fabric.com and love it.  I laid the fabric wrong side up, sprayed the board with spray adhesive, and then carefully pressed the board on to the fabric.  I let it sit for a minute, then flipped it over, sprayed the other side, and folded the fabric the rest of the way around.  The spray adhesive I got allows you time to re position if you need to, which was much appreciated.

When I started researching how to build furniture several months ago, it became very apparent to me that I needed to buy a Kreg Jig.  I convinced my husband we needed it for this project, and he was kind enough to purchase it for me, even though he had never seen one before.  He now thinks it is one of the greatest tools ever, so I feel super smart for recommending it. :)  It allows you to drill at these fun little angles so that it is easy to attach boards without having the screws showing.  We drilled holes into the boards that would be the main part of the headboard and then attached them to the side pieces.

We struggled a lot deciding how to hang the headboard on the wall.  I didn't want screws showing, and the studs in our wall didn't line up with where we would ideally attach the headboard.  In the end, we used two  1"x2"x8' boards (that we cut to 75" so that you wouldn't see them behind the headboard).  We attached them to the studs in the wall, and then screwed the side pieces of the headboard to them.  We used the Kreg Jig again on the trim pieces so that we could screw them in from the top on bottom to attach them to the front of the headboard, allowing for no screws to be seen from the front.

Here are the boards, and the headboard before the final trim was added.

I love how it turned out!  We sat in our room last night and looked around at the built in shelves (my husband built them a few years ago for me...pictures coming soon), the headboard, and the church pew and dresser I refinished, and realized that we have essentially made everything in there.  Everything is exactly how I wanted it to be, and none of it could have been purchased because it is all my design.  That makes me super happy!

Finished product...

Dresser Refinish - From Ugly to Fab

Our bed used to have drawers under it, so we really didn't need a dresser in our room.  We recently got a new bed, so I had to quickly find a dresser to make up for the lost drawer space.  Per the norm, I had something specific in my head, and looked everywhere trying to find the perfect thing.  Of course, the perfect thing was no where to be found, so started looking for something old to make into something new.  

We continually visited all of the thrift stores in the the area for several weeks until I found this gem...

I started by removing all the drawers, taking the hardware off, and wiping everything down with a damp cloth.  I had paint leftover from a built in shelf project my husband did in our room, so I used that to make chalk paint (same method I used in this post for another project).  This wood wasn't easily covered, so I ended up putting three coats of paint on, when with most projects I only need to do two.  In between paint coats, I sprayed the hardware with this spray paint...

It doesn't even seem like the same dresser to me anymore.  It amazes me what a little paint can do for a piece of furniture.  

Before/After

I love how it looks against the purple wall!

Little Girl's Jeans Refashion

My daughter grows out of clothes length wise, never width wise.  She has long, skinny legs pants that are long enough for her always end up being too big in the waist, even with the adjustable waist bands.  That being said, she outgrows the legs of the pants long before she ever is too big for the waist.  Every year I think about trying to extend the life of her jeans, and finally got around to working on a pair of them.  She had a pair of skinny jeans that were too short, and a little worn in the knees, but fit fine otherwise.  I decided to add a cute ruffle to the bottom and put patches on the knees to give them a little more life.  

I started by cutting the hem of the jeans off right above the cuff.  Once I had that piece, I cut it and measured the length to find out how big around the ruffle would need to be. This was my easy solution to avoid putting any sort of effort into figuring out my measurements.  It was 10.75" long, so I doubled that for the width to allow enough room to gather the fabric. 

Not a great picture, but you'll get the idea...

I wanted my ruffle to be about 2.5", and I hate adding hems, so I cut the fabric at 6" and folded it in half.  Here are the steps I went through for the ruffle... 

I sewed the ends together to make a circle, and then gathered the top edge.  I recently bought a gathering presser foot for my sewing machine, and it changed my life.  I was horrible at the loose stitch, pull the strings to gather method, and just ended up avoiding anything that required gathering.  Now it takes barely any time at all and looks a million times better.  Once I had the gathering done, I flipped it inside out and pinned it around the cuff of the jeans (they were right side out) and sewed them together. I pressed them flat and topstitched around the jeans as well, but didn't take a picture of that step.

Next, I made appliques using the same method I described in my Denver Bronco Baby Onesies post.  I placed them on the knees and on a shirt so that she would have a whole outfit.  

I love how it turned out and my little fashionista was more than happy to pose for pictures.